Configure IO Bit As Output
Command
CIO <index> <ON or OFF>
Description
DIO points can operate as inputs or outputs. The "Input Bit" expression will report the level of the point whether in is being driven internally by an output driver or driven externally by a sensor. However it is necessary to indicate if the driver should be active as an output. This command turns on the driver so that the output voltage can be controlled.
Escapes
A Too Few Parameters Escape Code will be generated if the parameter is less than 1.
Examples
This command list configures DIO 1 as an output and controls it with the Set Output Bit command:
Related Topics