Command
<axis or group> DCL <value>
Description
This command is used to set the deceleration of a profiled move in user units per second squared. If the Axis Object indicated is a single axis (T1Axis) the deceleration is for the movement of that motor when operating alone. If the Axis Object represents a multiple axis group such as a two dimensional (T2Axis) or four dimensional group (T4Axis), the deceleration applies to the coordinated motion profile of the group. Accel else Set Accel may be used to independently set the Acceleration of the axis or group.
Escapes
If the Decel setting is 0 or negative an User Decells 0 Or Negative Escape Code will occur.
If a new decel value that is issued during a move cannot be achieved with the current direction and speed a Motion Overrun Escape Code will occur.Examples
This list of commands performs a move with a decel that is more gradual than the accel
This list of commands performs a coordinated vector move with a sharp decel compared to the accel
Related Topics